Use, Maintenance, And Installation Of Filling Machines

1. Because this filling machine is an automated machine, the dimensions of easy to pull bottles, bottle cushions, and bottle caps must be unified.
2. Before driving, you must first use the joystick to rotate the machine, check if there are any abnormalities in its rotation, and confirm that it is normal before driving.
3. When adjusting the machine, tools should be used appropriately. It is strictly prohibited to use oversized tools or use excessive force to disassemble parts to avoid damaging the machine or affecting machine performance.
4. Every time the machine is adjusted, it is necessary to tighten the loosened screws and use the joystick to rotate the machine to see if its movement meets the requirements before driving.
5. The machine must be kept clean, and it is strictly prohibited to have oil stains, liquid medicine, or glass debris on the machine to avoid damage and corrosion. Therefore, it is necessary to:
(1) During the production process, the machine should promptly remove liquid medicine or glass debris.
Before handover, each part of the machine surface should be cleaned once and clean lubricating oil should be added to each activity department.
⑶ It should be thoroughly cleaned once a week, especially in areas that are difficult to clean during normal use, or blown clean with compressed air.